PIP

$265.00
Safety Instrumented Systems Guidelines Process Industry Practices / 01-Dec-1999 This Practice was withdrawn on May 11, 2007. A significant portion of this Practice was included in the 2004 ISA revision which has been accepted by ANSI, IEC, and OSHA. This Practice provides designers of Safety Instrumented Systems (SIS) with engineering guidelines appropriate for SIS meeting requirements as defined in ANSI/ISA-S84.01-1996, Application of Safety Instrumented Systems for the Process Industries...
$75.00
Temperature Measurement Fabrication Details Process Industry Practices / 01-Apr-2000 This Practice is a series of six drawings with fabrication details for threaded, flanged, welded-in, and socketweld thermowells in addition to resistance thermal device thermocouples and resistance thermal device thermocouples with thermowell-mounted head. Note: This is a withdrawn item.
$37.50
Qualification, Inspection, and Testing of Monolithic Refractory Installations Process Industry Practices / 01-Jul-2004 This Practice defines the requirements for quality control and quality assurance provided by the installer of refractory monolithic lining materials. This Practice covers the general requirements for testing and inspecting of monolithic refractory linings. Test and inspection methods include installer prequalification, production sample testing, and inspection of the...
$25.00
Piping Material Specification 1CJ1S01 Class 150, 1-1/4 CR - 1/2 MO, 0.063" C.A. Process Process Industry Practices / 01-May-2000
$37.50
Certification and Prequalification of Monolithic Refractories Process Industry Practices / 01-Jul-2004 This Practice describes the requirements for certification and prequalification of the refractory materials used to construct monolithic refractory linings in process equipment and piping. This Practice provides a basis for selection, purchase, and quality control of refractory materials before installation. This Practice describes the material property, testing, documentation, storage, and...
$27.50
Allowable Piping Loads on Rotating Machinery Nozzles Process Industry Practices / 01-Dec-1997 The purpose of this Practice is to provide requirements for reducing the total life cycle costs of rotating machinery by determining allowable piping loads and piping load application to rotating machinery. Comment: User experience has shown that designing for the maximum published allowable loads for most machinery results in low Mean Time Between Repair (MTBR) and higher than acceptable...
$30.00
Roadway and Area Paving Construction Specification Process Industry Practices / 01-Apr-2002 This Practice provides the contractor with roadway and area paving requirements for construction. Minimum requirements for design, materials, construction methods, and inspection and testing for roadways and area paving are included.
$25.00
Packaged Equipment Instrumentation Documentation Requirements Data Sheet Process Industry Practices / 01-Dec-1999
$25.00
Piping Material Specification 12 PD0H02, SDR-11, High Density Polyethylene (HDPE), Utility (Underground) Process Industry Practices / 01-Dec-2003
$25.00
Small, General Purpose Packaged Equipment Instrumentation Data Sheet Process Industry Practices / 01-Jul-2002 Specific owner requirements are shown on this two-page data sheet, defining the minimum requirements for the performance, design, fabrication, testing, and inspection of instrumentation systems installed on small packaged equipment.
$97.50
Fixed Industrial Stairs Process Industry Practices / 01-Apr-2002 This Practice provides the fabricator and erector with a standard fixed industrial stair design to be used in process industry facilities. It also provides process industry companies with design guide information to be used in specifying and designing fixed industrial stairs. Design details for fabrication and installation of typical OSHA-regulated stairs for open structures and miscellaneous platforms for regular operational...
$97.50
Details for Pipe Railing for Walking and Working Surface Details Process Industry Practices / 01-Aug-2003 This Practice provides requirements for designers, fabricators, and installers of pipe railing. This Practice provides fabrication and installation details for standard pipe railing for walking and working surfaces and for stair railing or handrail for egress. Although the details in this Practice are intended to meet U.S. Occupational Safety and Health Administration (OSHA) requirements...
$132.50
Details for Angle Railings for Walking and Working Surfaces Process Industry Practices / 01-Jun-2004 This Practice provides fabrication and installation details for standard angle railing for walking and working surfaces and for stair railing and handrail for egress stairs. This Practice is intended for designers, fabricators, and installers of angle railing.
$12.50
Field Inspection and Testing of New Electrical Equipment Data Sheet Process Industry Practices / 01-Sep-2002
$35.00
Low-Voltage Fused Switch Motor Control Centers Process Industry Practices / 01-Mar-2000 This Practice provides the requirements for design, fabrication, testing, and handling of low-voltage motor control centers using fused switches that will be installed in chemical plants and petroleum facilities. The requirements of this Practice apply to factory-assembled 600 V fused switch motor control centers. It includes requirements for buses, enclosures, motor starters, and fused switches. All...
$32.50
Design and Fabrication of Online Ferroresonant Uninterruptible Power Supply System Process Industry Practices / 01-Jun-2002 This Practice provides a specification for purchase of a complete single-phase, continuous duty, solid-state, on-line, ferroresonant uninterruptible power supply (UPS) system for the continuous process industry. This Practice covers requirements for design, fabrication, and inspection and testing of all parts of a continuous duty, solid-state, on-line, ferroresonant UPS...
$500.00
Motor Installation Details (125 Details & Index) Process Industry Practices / 01-Oct-1996 This Practice contains approximately 125 installation details and bill of material lists for 600-volt motor and control stations.
$12.50
Data Sheet for Low-Voltage Fused Switch Motor Control Centers Process Industry Practices / 01-Mar-2000
$12.50
Data Sheet for Design and Fabrication of Online Ferroresonant Uninterruptible Power Supply System Process Industry Practices / 01-Jun-2002
$80.00
Installation of Monolithic Refractories Process Industry Practices / 01-Jun-2005 This Practice provides the requirements for the installation of monolithic refractory linings in process equipment and piping. Installation methods include preparation, application, curing, and repair of the linings. RFSM2000 also covers heat dryout of newly installed or repaired linings.