BHMA

$12.00
Testing and Rating of Severe Windstorm Resistant Components for Swinging Door Assemblies Builders Hardware Manufacturers Association / 10-Sep-2003 / 26 pages This standard provides procedures for testing and establishing load ratings (design load in pounds per square foot or pounds force) for components of exterior swinging door assemblies for purposes of protection of openings during severe windstorm conditions, such as a hurricane, that produces sustained wind speeds or gusts in a range of...
$18.00
Delayed Egress Locks Builders Hardware Manufacturers Association / 11-Dec-2003 / 8 pages 1. SCOPE 1.1 This standard covers products used in connection with conventional exit devices or locks causing the doors to remain locked after releasing actuation for a predetermined length of time. Performance criteria are included for functional, cycle, operational, fail-safe and overload requirements. 1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage,...
$18.00
Mortise Locks & Latches, Series 1000 Builders Hardware Manufacturers Association / 16-Jun-2005 / 32 pages This Standard establishes requirements for Mortise Locks and Latches and includes operational tests, security tests, cycle tests, finish tests, material evaluation tests and dimensional criteria. Tests described in this Standard are performed under laboratory conditions. In actual usage, results may vary because of installation, maintenance, and environmental conditions. When mortise...
$18.00
Interconnected Locks & Latches Builders Hardware Manufacturers Association / 16-Nov-2005 / 32 pages Requirements for Interconnected Locks and Latches and includes performance tests, security tests, operational tests, finish tests and dimensional criteria. Functions are described and identified with numbers. This item is available as part of a discounted standards set covering Door Locks.
$18.00
Strap and Tee Hinges and Hasps Builders Hardware Manufacturers Association / 17-Apr-2006 / 12 pages This Standard establishes requirements for Strap Hinges, Tee Hinges, and Hasps, and includes performance tests covering operational and strength criteria. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions. This item is available as part of a discounted standards set...
$18.00
Continuous Hinges Builders Hardware Manufacturers Association / 11-Oct-2006 / 15 pages This Standard establishes requirements for architectural continuous hinges used in building construction. Cycle, finish, abuse, overload, vertical wear, and strength tests are included. This item is available as part of a discounted standards set covering Hanging of Doors .
$18.00
Butts & Hinges Builders Hardware Manufacturers Association / 11-Oct-2006 / 26 pages Provides cyclical, lateral, and vertical wear tests, together with finish tests requiring salt spray exposures. Individual hinge types are described and identified with code numbers. This item is available as part of a discounted standards set covering Hanging of Doors .
$18.00
Materials and Finishes Builders Hardware Manufacturers Association / 05-Dec-2006 / 25 pages Code numbers for finishes on various basis materials. It includes criteria for viewing comparative finishes in the field to determine whether they match and establishes five categories of finishes.
$18.00
Sliding and Folding Door Hardware Builders Hardware Manufacturers Association / 12-Sep-2007 / 27 pages This Standard establishes requirements for Sliding and Folding Door Hardware. Cycle tests, abuse, durability static load, smoothness, static friction, kinetic friction and finish tests are included. Hardware for light to very heavy doors is covered including both residential and industrial applications.
$18.00
Electrified Locking Devices Builders Hardware Manufacturers Association / 19-Dec-2007 / 14 pages Electrified locking systems are comprised of input devices, locking devices, controlling devices, and power supplies. This Standard establishes requirements for electrified locking devices, which control door access. When the input or controlling device or both are an integral part of the locking device, they shall also be covered by this standard. This standard includes requirements for...
$18.00
American National Standard for Integrated Door Opening Assemblies Builders Hardware Manufacturers Association / 19-Jun-2008 / 12 pages 1. SCOPE 1.1. This Standard establishes requirements for Integrated Door Opening Assemblies with steel, wood and fiberglass reinforced doors which are supplied to the customer with integral hardware. At a minimum, they shall include a door, frame, hanging device, and latching mechanism. 1.2. Performance requirements include operational, cycle, abuse and...
$18.00
American National Standard for High Security Cylinders Builders Hardware Manufacturers Association / 21-Dec-2007 / 19 pages 1.1 This standard includes security performance based requirements for both mechanical and electrified high security cylinders. For the purpose of this standard, High Security Cylinder includes mechanical lock cylinders, electromechanical cylinders, and the electronic lock sub assemblies that are analogous to the cylinder assemblies. Cylinders include their keys or...
$18.00
Hardware Preparation in Steel Doors and Steel Frames Builders Hardware Manufacturers Association / 06-Jul-2006 / 22 pages This Standard was first published by the Door and Hardware Institute in a series of individual A115 standards, which are now combined into single documents for steel and wood doors. ANSI approval was secured under the Canvass Method. BHMA was accredited on 21 March 1983 by ANSI as a sponsor using the Canvass Method. This Standard covers all significant dimensional...
$18.00
Hardware Preparation in Wood Doors with Wood or Steel Frames Builders Hardware Manufacturers Association / 06-Jul-2006 / 18 pages This Standard was first published by the Door and Hardware Institute in a series of individual A115 standards, which are now combined into single documents for steel and wood doors. ANSI approval was secured under the Canvass Method. BHMA was accredited on 21 March 1983 by ANSI as a sponsor using the Canvass Method. This Standard covers all significant dimensional...
$18.00
American National Standard for Electric Strikes and Frame Mounted Actuators Builders Hardware Manufacturers Association / 12-Sep-2007 / 13 pages ANSI/BHMA A156.31 establishes requirements for Electric Strikes and Frame Mounted Actuators, and includes operational and finish tests. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions. This item is available as part of a...
$18.00
American National Standard for Exit Locks, Exit Locks with Exit Alarms, Exit Alarms, Alarms for Exit Builders Hardware Manufacturers Association / 11-Sep-2007 / 14 pages ANSI/BHMA A156.29 establishes requirements for Exit Locks, and Exit Locks with Exit Alarms, Exit Alarms and Alarms for Exit Devices and includes operational and finish tests. Alarms for Exit Devices include operational tests only. Tests described in this Standard are performed under laboratory conditions. In actual usage,...
$18.00
Exit Devices Builders Hardware Manufacturers Association / 24-Sep-2008 / 29 pages Provides requirements for exit devices. Included are cycle, operational, strength and finish tests. Functions and types are described and numbered. This item is available as part of a discounted standards set covering Door Locks.
$18.00
Door Controls - Closers Builders Hardware Manufacturers Association / 01-Oct-2008 / 42 pages Contains requirements for door closers surface mounted, concealed in the door, overhead concealed and concealed in the floor. Also included are pivots for floor closers. Criteria for conformance include cycle, operational, closing force and finish tests. This item is available as part of a discounted standards set covering Door Controls.
$18.00
Auxiliary Hardware Builders Hardware Manufacturers Association / 17-Sep-2008 / 39 pages This Standard establishes requirements for auxiliary hardware and includes performance tests covering operational, cyclical, strength or finish criteria. Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions. This item is available as part of a discounted standards set covering Trimming of...
$18.00
Template Hinge Dimensions Builders Hardware Manufacturers Association / 19-Aug-2009 / 22 pages The purpose of this Standard is to establish nationally recognized dimensions for builders template hinges which are used on metal doors and frames. This Standard is intended to assure the interchangeability of template hinges and to provide a uniform method for template identification.