Home > AS/NZS
SAI Global is one of the world's leading business publishing, compliance, training and assurance organizations with offices in North America, Europe, Australia, New Zealand and Asia. Through its network of auditors and training professionals, SAI Global delivers an integrated range of standards and business improvement related products and services. These services are based on Australian Standards, International Standards and foreign standards that are the common denominator in countless daily business transactions, facilitating trade between individuals, corporations and nations. SAI Global's Publishing Division is a world leader in the innovative use of web-based technologies for the production and distribution of intellectual property, including Australian National Standards and Australian New Zealand National Standards.
Wool - Method for measuring average yellowness of raw wool Standards Australia / 01-Jan-1996 Sets out a method to be used to measure average yellowness of samples of raw wool prepared for mean fibre diameter measurement in accordance with AS/NZS 1133, Wool - Determination by the Airflow Method of the mean fibre diameter of core samples of raw wool.
Road lighting luminaires with integral control gear Standards Australia / 01-Jan-1998 Specifies requirements for the design, construction, performance and testing of road lighting luminaires with integral control gear, to ensure their suitability for the operating and environmental conditions to which they will be subjected in service. Applies to luminaires with discharge lamps of various types and ratings, which are designed to provide road lighting of Category V in accordance with AS/NZS...
Installation of particleboard flooring Standards Australia / 01-Jan-1998 Sets out procedures for the selection, placement and fixing of particleboard flooring complying with AS/NZS 1859.1. Appendices provide check lists for areas of supervision and recommendations for subfloor ventilation.
Refrigerated display cabinets - Defrosting test Standards Australia / 01-Jan-2003 Specifies a procedure to test the defrosting method or refrigerated display cabinets when tested at the same conditions as those specified for the temperature test (AS/NZS 1731.5). This test is not applicable to cabinets for parts of cabinets intended to be defrosted manually.
Approval and test specification for overhead line connector boxes Standards Australia / 01-Jan-2002 Specifies essential safety and associated requirements for the design, construction and testing of overhead line connector boxes, which must bemet before the connector boxes can be offered for sale. It is intended to be read in conjunction with AS/NZS 3100.
Pressure equipment - Glossary of terms Standards Australia / 01-Jan-2001 Specifies an alphabetical listing, with illustrations where appropriate, of terms and definitions from various pressure equipment-related Standards referenced in AS/NZS 1200.
Certification of welders and welding supervisors Standards Australia / 01-Jan-2001 Specifies the requirements necessary for the granting of certificates to experienced welders engaged in the various welding processes used in the manufacture of pressure equipment, such as boilers, pressure vessels and associated piping, as defined in AS/NZS 1200, as well as, other applications requiring a prescribed standard in the theory and practice of welding.
Uninterruptible power systems (UPS) - General and safety requirements for UPS used in operator access areas Standards Australia / 01-Jan-2003 Specifies general and safety requirements for low voltage electronic Uninterruptible Power Systems (UPS) installed in operator accessible areas. This Standard is to be read in conjunction with AS/NZS 60950.1.
Pressure equipment - Operation and maintenance Standards Australia / 01-Jan-2001 Specifies minimum requirements and guidance on the operation and maintenance of boilers, pressure vessels, associated control and safety equipment, piping and auxiliaries, and in the execution of such work. Covers actions required by the owner-user from initial receipt of the equipment on-site until final disposal. Applies to commissioning, operation, maintenance, routine inspection, storage and disposal,...
Quality management systems - Guidelines for quality management in projects Standards Australia / 01-Jan-2003 Provides guidance on qualty system elements, concepts and practices for which the implementation is important to, and has impact on, the achievements of quality in project management and supplements the guidance given in AS/NZS ISO 9004. It is identical with and has been reproduced from ISO 10006:2003.
Pressure equipment - Installation Standards Australia / 01-Jan-2001 Specifies requirements and guidance on the installation of pressure equipment (boilers, pressure vessels and pressure piping), control, and safety equipment in accordance with AS/NZS 1200 and Standards referenced therein, together with other relevant Standards. It recognizes the growing use of management systems to ensure the initial and continued safe, reliable performance of pressure plants.
Uninterruptible power systems (UPS) - General and safety requirements for UPS used in restricted access locations Standards Australia / 01-Jan-2003 Specifies general and safety requirements for low voltage electronic Uninterruptible Power Systems (UPS) installed in areas with restricted access. This Standard is to be read in conjunction with AS/NZS 60950.1.
Mechanical properties of fasteners made of carbon steel and alloy steel - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm. Standards Australia / 01-Jan-2000 Specifies a test procedure for the determination of torsional strength and the minimum breaking torques of bolts and screws with nominal diameters 1 mm to 10 mm and with property classes 8.8 to 12.9. The test applies to bolts and screws with thread less than M3 for which no breaking and proof...
Particleboard flooring - Installation Standards Australia / 01-Jan-2006 Proposes procedures for the selection, placement and fixing of Class 1 particleboard flooring complying with AS/NZS 1860.1. Appendices propose check lists for areas of supervision, recommendations for subfloor ventilation, and recommendations on installation procedures for particleboard flooring for general domestic applications.
Pressure equipment - Boilers Standards Australia / 01-Jan-2006 Specifies requirements for materials, design, construction, inspection and testing boilers as defined in AS/NZS 1200. It specifically applies to the design and construction of boilers, including superheaters, reheaters and economizers. Guidance is also provided regarding locomotive and other heritage boilers, and the design of blowdown vessels.
Information technology - Multimedia content description interface - Reference software Standards Australia / 01-Jan-2005 Specifies simulation software for tools defined in Parts 1,2,3,4 and 5 of AS(NZS) 15938. This software has been derived from the verification models used in the process of developing of the Standard.
Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001 Standards Australia / 01-Jan-2007 Adopts ISO 16106:2006 as an Australian Standard. Provides guidance on quality management provisions applicable to the manufacturer, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. The Standard is intended...
Pressure equipment - Hazard levels Standards Australia / 01-Jan-2005 Specifies criteria for determining the hazard levels of various types of pressure equipment to AS/NZS 1200. It also classifies fluids for use in pressure equipment.
Retroreflective materials and devices for road traffic control purposes - Retroreflective devices (non-pavement application) Standards Australia Specifies performance requirements for two types of discrete retroreflectors which have higher photometric performance than sheet materials specified in AS/NZS 1906.1. The first type of device is intended to provide roadside delineation at night. The dimensions specified make them suitable for attachment to 100 mm wide guideposts. The second type of...
Pressure equipment - Boilers Standards Australia This standard sets out requirements for materials, design, construction, inspection and testing of boilers as defined in AS/NZS 1200. Specifically applies to design and construction of boilers including superheaters, reheaters and economizers. Incorporates the existing AS 1228-1990, Boilers-Water-tube, and AS 1797-1986, Boilers-Fire-tube, shell and miscellaneous, into one document. This incorporation eliminates duplication and possible...